No. 15 (2012): Issue 18

The Journal’s Scope

• Processes of Strength Formation of Molding and Core Sand Mixtures

  E. G. Antoshkina, V. A. Smolko (Author)

  • PDF (Russian)

• On Formation of Adhesive Contacts in Synthetic Sand Mixtures

  V. A. Smolko, E. G. Antoshkina (Author)

  • PDF (Russian)

• Analysis of Physical and Chemical processes of Structure Formation of Liquid Glass Molding and Core Mixtures in Dispensable Mold Casting

  V. G. Gurlev (Author)

  • PDF (Russian)

• Porosity in Metal Deposited by Brkmts3-1 Open Arc Wire

  A. M. Osipov, P. A. Norin (Author)

  • PDF (Russian)

• Probabilistic-Statistical Model of Defect-Free Welded Joint

  A. K. Tingaev, R. G. Gubaidulin, P. A. Norin (Author)

  • PDF (Russian)

• Problems of the Avalanche Destructions of Welded Pipelines and Methods of Their Prevention

  V. A. Lupin, Yu. I. Pashkov, M. A. Ivanov (Author)

  • PDF (Russian)

• Residual Welding Stresses and Ways to Reduce Stress-Corrosive Destruction of Trunk Gas Pipelines

  Yu. I. Pashkov, M. A. Ivanov, R. G. Gubaidulin (Author)

  • PDF (Russian)

• Stressed State of Welded Joints of Tubular Units Without Gusset Plate

  R. G. Gubaidulin, A. K. Tingaev, V. A. Lupin (Author)

  • PDF (Russian)

• Development of Classifier of Defects for Welded Pipes

  Yu. I. Pashkov, V. A. Lupin, M. A. Ivanov (Author)

  • PDF (Russian)

• Theoretical Basics of Computer-Assisted Engineering of High-Temperature Nickel Casting Alloys

  A. A. Ganeev, E. F. Shaikhutdinova, B. A. Kulakov, A. I. Mezentseva (Author)

  • PDF (Russian)

• Thermodynamic Properties of Vanadium Nitride

  V. I. Shishkov, V. M. Zhikharev (Author)

  • PDF (Russian)

• Thermodynamic Analysis of the Iron–Chromium–Nickel–Nitrogen System

  B. I. Leonovich, Yu. S. Kuznetsov, E. A. Trofimov (Author)

  • PDF (Russian)

• System Analysis of Iron Oxide Reduction in Water Gas Atmosphere in the Presence of Carbon

  G. P. Vyatkin, G. G. Mikhailov, Yu. S. Kuznetsov, O. I. Kachurina (Author)

  • PDF (Russian)

• Thermodynamic Analysis of Phase Equilibria in Chromium Steels Deoxidized with Manganese and Zirconium

  L. A. Makrovets, G. G. Mikhailov, D. A. Vydrin (Author)

  • PDF (Russian)

• Thermodynamic Analysis of Phase Equilibria in the NI–AL–С–O and NI–CA–С–O Systems Under the Condition of Existence of Nickel Melt

  E. A. Trofimov (Author)

  • PDF (Russian)

• Analysis of Phase Equilibria in the NI–SI–O and NI–SI–С–O Systems Under the Condition of Existence of Nickel Melt

  E. A. Trofimov (Author)

  • PDF (Russian)

• Research and Development of a Program for Thermodynamic Calculation of Chromium Reduction in ore-Thermal Furnace

  K. K. Kaskin (Author)

  • PDF (Russian)

• Continuous Remelting of Metallized Iron Ore Pellets in an Ore-Thermal Furnace For Obtaining The Semi-Product Material

  K. K. Kaskin (Author)

  • PDF (Russian)

• Gas Formation in Aluminothermal Smelting of Ferrotungsten

  I. Yu. Pashkeev, K. Yu. Pashkeev (Author)

  • PDF (Russian)

• Investigations of Sulfatizing Roasting Process of Rough Copper Concentrate from Pure Ore Of The Annensk Deposit

  K. Zh. Zhumashev, L. M. Karimova, A. B. Yun, T. E. Tokbulatov, E. T. Kairalapov, D. M. Zhiembaeva (Author)

  • PDF (Russian)

• Phase Transformations During Oxidizing Roasting of Copper Sulphide Smelting Slag

  A. A. Lykasov, A. N. Matonin, I. G. Verty, A. A. Kimyashov (Author)

  • PDF (Russian)

• Improving the Technology of Smelting Nickel-Based Heat-Resistant Alloys in an Open Arc Furnace Using Alloy Wastes

  B. V. Oschepkov, T. A. Zhiltsova (Author)

  • PDF (Russian)

• Influence of Tin Addition on the Cutting Process of Structural Steels

  M. S. Nikitin, A. V. Ryabov (Author)

  • PDF (Russian)

• Creep of Ultralight Magnesium Alloys at Low Temperatures

  S. I. Ilyin, Yu. D. Koryagin, I. V. Lapina (Author)

  • PDF (Russian)

• Softening of Cold-Worked Al–6%Mg Alloy by Fast Heating in the 100…300 °C Temperature Range

  Yu. D. Koryagin (Author)

  • PDF (Russian)

• Internal Stresses During Cooling of Large Forgings

  D. A. Mirzaev, A. D. Shaburov (Author)

  • PDF (Russian)

• Nucleation Site Saturation аnd Kinetic Parameters of Austenite-Ferrite Transformation in Fe–9%Cr Alloys

  K. Yu. Okishev (Author)

  • PDF (Russian)

• Mathematical Modeling of the Pressing Process of Pipes of Varying Section

  A. V. Vydrin, Ya. I. Kosmatsky, B. V. Barichko (Author)

  • PDF (Russian)

• Modeling of the Strain-Stress Distribution During High Stripe Sinking (Bilateral Metal Flow)

  A. V. Vydrin, A. V. Zinchenko, B. V. Barichko (Author)

  • PDF (Russian)

• Test Mill of Step-by-Step Rolling SShr-82.5

  G. I. Koval, V. G. Dremin (Author)

  • PDF (Russian)

• Experimental Research of the Step-By-Step Rolling in Forward and Reverse Motion

  G. I. Koval (Author)

  • PDF (Russian)

• The System Approach in Designing and Management of Roll Stock of Section Mills

  F. S. Dubinsky, A. V. Vydrin, I. N. Chernykh (Author)

  • PDF (Russian)